oscillating follower

Influence of Change in Oscillating Follower Length on Cam Mechanism Working Ability

论摆动从动件长度变化对凸轮机构工作性能之影响

A designing method of the minimum size oscillating follower cylinder cam mechanism

最小尺寸摆动从动杆圆柱凸轮机构的设计法

A Study on the Laws of Pressure Angle in Oscillating Follower Cam Mechanisms

摆动从动件凸轮机构压力角规律的研究

Mathematical Analysis of the Pressure Angle in Radial Translating and Oscillating Follower Cam Design

摆动及直动从动件凸轮设计中压力角的数学分析

Using Differential Method to Get the Best Design Parameters of a Disc Cam Mechanism With Oscillating Follower

微分法求解摆动从动件盘形凸轮机构最佳参数

Effect of Basic Dimensions for Disk Cam Mechanism with Oscillating Follower on Transmission Force Property

摆动推杆盘形凸轮机构基本尺寸对传力性能的影响

Design of minimum size oscillating follower translating cam mechanism

最小尺寸摆动从动杆移动凸轮机构的一种设计方法

Defining Minimum Base Radius of Plate Cam for Oscillating Follower by 0.618 Optimization Method

0.618法最优确定盘状摆动凸轮机构的最小基圆半径

Effect of Tool 's Dimensional Variation on Machining Accuracy of Cylinder Cam with Oscillating Follower

刀具尺寸变动量对摆杆从动件圆柱凸轮加工精度的影响

Determination of the basic size of cam mechanism with oscillating follower based on the allowed pressure angle ;

本文研究了摆动从动件盘形凸轮机构按推程许用压力角确定基本尺寸的数学模型。

Analytics for the Eccentric Cam Oscillating Follower Mechanism and Power

偏心圆凸轮从动件运动和动力分析

Designing the Geometrical Amounts Oscillating Follower Cam Mechanisms in Accordance with Allowable Pressure Angle

按许用压力角确定摆动从动件凸轮机构的几何尺寸

The application of support function method in the design of flat bottomed oscillating follower equal-width cam mechanisms

支撑函数法在平底摆动从动件等宽凸轮机构设计中的应用

Discussion on the Methods of Calculating the Pressure Angle of a Cam with Oscillating Follower Offset from the Axis

论偏置摆动从动件凸轮压力角的计算方法

A study on nomographic method to determinate the basic dimensions for disk cam with oscillating follower

确定摆动从动件盘形凸轮机构基本尺寸的线图法研究

A Study on Relations between Basic Sizes of Disk Cam with Oscillating Follower and Pressure Angles of Lift Travel

摆杆盘形凸轮机构基本尺寸对推程压力角影响的初探

This study has attempted to develop equations to calculate the radi - al translating and oscillating follower cam pressure angle .

本文阐述摆动从动件及直动从动件凸轮设计中压力角的计算方法。

In this paper , a perfect graphic method is derived from mathematics to determine the base circle of a cam with an oscillating follower .

本文经数学推导，给出确定摆杆凸轮机构基圆的正确作图方法。

The results reported can provide a guidance in the research of the pressure angle of oscillating follower cam mechanisms and in the design of cam mechanisms .

对研究摆动从动件凸轮机构压力角和设计凸轮机构具有指导意义。

Meeting requirement of the mechanical pressure angle , the minimum base radius of a plate cam for oscillating follower is determined by the 0.618 optimization method .

在满足机构许用压力角条件下，采用0.618法最优确定盘状摆动凸轮机械的最小基圆半径。

A solving method of maximum travel angle and minimum motion angles of push travel and return travel of shperical cam mechanism with oscillating follower

摆动从动件球面凸轮机构最大行程角和最小推、回程运动角的求解方法

With the help of cam profile and cam rotation , common disk cam with reciprocating and oscillating follower can gain follower motion which is needed ;

普通直动、摆动从动件盘形凸轮机构，借助凸轮轮廓形状，由凸轮转动来实现预期的从动件运动；

To analyze the cause of design error on Oscillating follower Cylinder Cam Mechanism , building the mathematics model , and affording the equation to conform to actual motion rule .

分析了摆动从动件圆柱凸轮机构误差产生原因，建立了数学模型，并给出其实际运动规律的方程。

This paper focuses on the analysis of running conditions and machining processes of spatial cam with oscillating follower . We point out the common errors in the biased distance cutting .

通过对摆动从动件空间凸轮工作过程的分析，指出常用的平面展开及偏距加工法存在的问题。

The relationship of cam with oscillating follower ′ s pressure angle and Basic dimensions were analyzed . an developing graphical design method precise soluting The cams basic dimensions was mentioned .

对摆动从动件盘形凸轮机构的压力角与基本尺寸之间的关系进行了分析，提出了一种求解摆动从动件盘形凸轮机构基本尺寸的方法。

For plate cam mechanism with flat-faced follower , this paper derived the formula and the curvature expressions of cam convex profile curve , which can be applied to both translating follower and to oscillating follower .

针对平底从动件盘形凸轮机构，导出了同时适用于直动和摆动从动件的凸轮廓线综合公式及凸轮实廓外凸的条件式。

According to allowable pressure angles , the determinations of an oscillating follower conjugate cam 's allowable axle center region and its border curves are analyzed . A method to compute its equivalent minimum base circle radius is given out .

对摆动从动件共轭凸轮按许用压力角确定凸轮轴心许用区进行了分析，给出了摆动从动件共轭凸轮等值最小基圆半径的计算方法。

Starting from the analogous - velocity chart of the oscillating follower plate earn mechanism , it puts forward a clear , audio - visual discription for the existing of optimum center and center distance , as well as its solving algorithm .

从摆动从动杆平面凸轮机构的类速度图出发，对最佳中心距a＊的客观存在性给予了清晰、直观的几何解释和论证，并由此建立起了求解最佳中心距a＊的解析法。

Oscillating follower spatial cam mechanisms are widely used in machinery field . However , the currently used methods to design the pitch curve of a spatial cam produce errors , as described in detail . In view of which , an accurate design methodology is proposed .

作为在机械领域有着广泛应用的摆动从动件空间凸轮机构，其通用的理论轮廓线的设计方法存在一定的误差，本文通过详细的误差分析，提出一套精确的设计方法。

In this paper , the formulas for computing the pressure angle of plate cam mechanism with oscillating follower are analysed . and the influences of the fundamental size of the mechanism on presure angle and the conception of offset of oscillating follower are discussed .

分析了摆动从动件盘形凸轮机构压力角的计算公式，讨论机构基本尺寸对压力角的影响以及摆动从动件盘形凸轮机构偏置的概念。