mechanical treatment

美 [məˈkænɪkl ˈtriːtmənt]英 [məˈkænɪkl ˈtriːtmənt]
  • 机械处理;机械加工
mechanical treatmentmechanical treatment
  1. So let 's see what happens in a statistical mechanical treatment .

    那么我们来看看,用统计力学来处理又会发生什么。

  2. A Statistical Mechanical Treatment of Hydrogen Evolution Reaction on FCC Metal

    面心立方金属电极氢析出反应统计力学处理

  3. Treatment of halitosis contains two aspects : mechanical treatment and chemical treatment .

    口源性口臭的治疗包括两方面机械性治疗和化学性治疗。

  4. Study on Mechanical Treatment of Asbestos Fibres Under Wet Condition

    石棉纤维湿法机械处理性能研究

  5. The Effect of Mechanical Treatment During Medium - Consistency Fluidization on Pulp Properties

    中浓纸浆流体化过程对纸浆性能的影响

  6. The quantum mechanical treatment of a light - damping oscillator damping rubber

    轻阻尼振子阻尼现象的量子力学处理

  7. Quantum mechanical treatment of a damped free oscillatory electric circuit

    阻尼自由振荡电路的量子力学处理

  8. Wastewater reutilization by membrane technology in mechanical treatment

    膜组合技术在金属表面处理工业中的中水回用

  9. Motion Control System was widely used in numeral control system , printing industry , mechanical treatment and so on .

    运动控制器广泛应用于数控,印刷,机械加工等行业。

  10. Coprecipitation and mechanical treatment of solid solution based on zro_2-ceo_2

    ZrO2-CeO2固溶体的共沉淀与机械处理

  11. In attempting quantitative quantum mechanical treatment of chemical bonds , approximations must be made .

    在试图定量地用量子力学去处理化学键时,人们必须采用近似法。

  12. Quantum mechanical treatment of time-dependent damped harmonic oscillator

    含时阻尼谐振子的量子力学处理

  13. The microcracks can be caused by friction , mechanical treatment , thermoelastic forces , etc.

    微裂纹可能是因摩擦、机械作用、热弹性力等等原因所造成。

  14. Mechanical treatment causes slight depression of apparent activation energy for leaching molybdenite in HNO_3-H_2SO_4 solution .

    机械活化处理使辉钼矿在HNO3-H2SO4溶液中的浸出反应的表观活化能逐步降低,但幅度不大。

  15. It is considered that an improvement of the finish plus a proper mechanical treatment of the cylinder lining surface may increase the life time of this component .

    文章认为:改善国产汽车缸套的表面光洁度并进行适当的表面机械处理将有助于提高该零件的寿命。

  16. This paper discusses the effect of mechanical treatment on pulp properties during medium consistency fluidization by the measurement of the pulp properties and SEM observation of the fibers .

    本文在对中浓纸浆进行流体化处理后,对纸浆的主要性能参数进行检测,并通过扫描电镜观察了纤维形态的变化,从而了解中浓纸浆流体过程对纸浆性能的影响程度。

  17. WASTEWATER REUTILIZATION BY MEMBRANE TECHNOLOGY IN MECHANICAL TREATMENT Wastewater in mechanical industry was treated for utilization by microfiltration ( MF ) and electrodialysis ( ED ) .

    采用微滤和电渗析膜组合技术对金属表面处理工业的实际中水进行资源化深度处理,以达到循环回用的目的。

  18. Based on practice , after treatment for dyed fabric should be strengthened by means of chemical auxiliary treatment and brushing mechanical treatment in order to obtain bulky and improve hand .

    生产实践表明,要获得蓬松丰满的绒毛,必须加强染色后产品的后处理,借助化学助剂和机械作用,改善手感、加强刷绒。

  19. The treated collagen fibre was analyzed by SEM . The results showed the prepared collagen fibre by cooperation of sulfuric acid and mechanical treatment that of ethanol or acetone .

    结果表明,硫酸预处理与机械处理协同作用制备胶原纤维,其效果优于乙醇预处理和丙酮预处理与机械处理协同作用;

  20. STATISTICAL MECHANICAL TREATMENT OF ADSORBED MONOLAYER AT ELECTRODE / SOLUTION INTERFACE ⅲ The Structure of Inner Layer Formed at The Interface of Hg / ( H_2O + CH_3OH ) Solution

    电极/溶液界面单分子吸附层的统计力学处理Ⅲ.汞电极上水-甲醇混合溶剂化层结构

  21. Combining with the geological survey results , do necessary mechanical treatment works on physical and mechanical parameters of rock by experiment , So that the initial parameters ill be consistent with the actual situation . 5 .

    结合现场地质调查结果,对试验得到的岩石物理力学参数进行必要的工程处理,以使初始参数符合实际情况。

  22. Commonly used method to reduce or eliminate the residual stress of welding is to have heat treatment or mechanical treatment after the welding . However , without predictive analysis , there is great uncertainty of the elimination effect .

    常用的降低或消除焊接残余应力的方法是在焊后采用热处理或机械处理,但这些方法在没有前期测量分析的情况下实施,消除效果的不确定性较大。

  23. In order to solve the problems of bad performance for mechanical treatment and optical losses , the organic groups are added in inorganic gel matrix . Not only the structures of matrix but also the properties of materials are improved greatly .

    为了解决传统无机凝胶材料的机械加工性能差,光损耗大等问题,将有机基团引入到无机凝胶基质中,不但可以较好地优化基质的结构,还可在很大程度上改善材料的性能。

  24. The embossed finish of cotton cord should be of chemical treatment combined with mechanical treatment . As to finishing , chemical and mechanical system can be used in combination according to the requirements for various styles so as to achieve desired results .

    棉灯芯绒的轧花整理必须采用化学整理与机械整理相结合的方法。整理采用化学整理和机械整理相结合,根据要求的风格分别处理,取得了较理想的效果。

  25. The two groups are required to use mechanical ventilation treatment .

    两组患儿均需应用呼吸机辅助通气治疗。

  26. Tensile deformation mechanism in pure copper subjected to surface mechanical attrition treatment

    表面机械研磨处理的纯铜拉伸形变机制

  27. Therapeutic effect and evaluation of mechanical ventilation treatment on ARDS caused by radiotherapy

    机械通气治疗放疗导致的ARDS的疗效及评价

  28. Investigation of Alloying Method of Pure Iron Subjected to Surface Mechanical Attrition Treatment

    纯铁表面机械研磨Fe-Ni合金化方法的研究

  29. The Observation on the Mechanical Ventilation Treatment of Patients with Acute Severe Left Ventricular Failure

    机械通气治疗重症急性左心衰16例疗效观察

  30. Microstructure and Properties of Zr-4 Alloy after Surface Mechanical Attrition Treatment

    表面机械研磨处理后Zr-4合金的组织与性能