local bending

The Classification of Local Bending Stress of Shell and Primary Structure Method

壳体局部弯曲应力的分类及其一次结构法

Computation of local bending stress in top cover plate of box & type main girder

箱形主梁上盖板局部弯曲应力计算

Study of local bending stress in bottom flange of ⅰ - beam crane rail

起重机工字钢轨下翼缘局部弯曲应力的研究

Mast Flange Local Bending by Thin Plate Bending Theory

用薄板弯曲理论求解门架立柱翼缘局部弯曲问题

The Local Bending of the Cylinder

圆筒的局部弯曲

Influences on the additional local bending stresses of the web due to changes in stiffener spacings ;

改变横向加劲肋间距对吊车梁附加弯曲应力的影响；

Impulse excitation and sine stable sweeping tests of local bending modes of the frame columns were conducted .

对框架柱进行了局部挠曲模态的脉冲激励试验和正弦稳态扫描试验。

Present paper analyses the local bending stress at flat flanges of I profile steel under wheel load of an electric hoist .

本文对平翼缘工字钢的冀缘板在电动葫芦轮压作用下所产生的局部弯曲应力进行分析。

Emulation results showed that when the local bending resonant mode of the mass is used as working mode , the vibration amplitude of the mass is large .

仿真发现，以振动块的局部弯曲共振模态作为工作模态能够得到更大的振幅。

Own that the local bending model is more appropriated for practical broad cylindrical storage tank and the radius-height ratio is the major factor for dynamic water pressure .

径高比是影响动水压力的主要因素，但不能忽视壁厚与高度之比这个因素。

A simplified method is given for calculating the maximum bending moment of piled raft which is considered to consist of local bending moment and global bending moment .

利用筏板局部弯曲和整体弯曲的简化计算公式，以局部弯曲与整体弯曲之和作为筏板基础承受的最大弯矩。

The empirical rules , which take into account the non neighbor interactions between the base pair steps , have been presented to predict the local bending of B DNA .

考虑碱基对梯阶之间的非紧邻相互作用，提出了预测BDNA局部弯曲的经验规则。

From experimental test and finite element analysis it can be seen that the maximum value of local bending stress is observed at the loading point , related free edge and root part of the flange .

从实测结果与有限元分析结果得出了翼缘板的局部弯曲应力的最大值主要出现在载荷作用点及相应的自由边处和根部。

In order to acquire the local bending spring-back accuracy of sheet metal strip of a progressive die design , the thesis aims to build ironing depth simulation model in a bending deformation zone .

为解决级进模具使用的带料上的局部折弯回弹的精度问题，本文建立了折弯变形区的过压量模拟模型。

This article deals with the application of the Navier method of finding the local bending stress in plate shell structure to the computation of the local bending stress in the top plate of the box-type main girder .

本文将经典板壳理论的Navier解法应用于起重机箱形主梁上盖板局部弯曲应力计算。

The model includes the shear , flexural and twisting deformations of the battened plates , and especially includes the local bending deformation of the flange plates which are directly connected to the battened plates .

所建模型，考虑了缀板的面内剪切变形、弯曲变形和自由扭转变形，同时还考虑了与缀板连接部位工字形截面翼缘的局部弯曲变形。

The Calculation , distribution , influential factors and range of bending moments on the mast flange local bending are analyzed theoretically . The curve of bending moments of the mast flange local bending under the unit load is presented also .

对翼缘局部弯曲弯距的计算，分布状况，以及影响因素和范围进行了理论分析，并给出了在单位力作用下翼缘局部弯曲弯矩的图表。

According to the theory of elastic fundamental beam and the related plate bending , the local bending deformation and the bending moment equation of the cylinder are derived under the condition that the . inner pressure along the cylindrical axis changes suddenly .

根据弹性基础梁和平板弯曲理论，导出压强沿圆筒轴线突变时圆筒的局部弯曲变形和弯矩方程。

In this paper a method for sol-ving the fork-lift truck mast flange local bending due to rollers is presented , based on the thin plate bending theory . The computer program has been prepared for IBM PC / AT .

本文以薄板弯曲理论为基础，提出了解决由滚轮引起的叉车门架立柱翼缘局部弯曲问题的方法，在IBMPc/AT机上编制了相应的程序。

Firstly , distribution of local bending stress is obtained through analogical test . Afterwards , MAS program for structural analysis is used to make finite element analysis of the computational model . As a result , computational diagrams and curves of maximum stresses are plotted .

首先通过模拟试验测得局部弯曲应力的分布规律，然后用MAS结构分析程序对计算模型进行了有限元分析，得出最大应力的计算图表和曲线。

It mainly comprises global affine transformation attack and local random bending attack .

该攻击主要包括全局仿射变换攻击和局域任意扭曲攻击两种。

Most algorithms become instable under geometrical attacks , particularly under local random bending attack ( RBA ) . Topics such as document-watermarking and multiple watermarks are also facing their bottlenecks .

特别是在抗几何攻击、局部非线性几何攻击和文本水印、多水印等方面还有许多瓶颈问题没有解决。

Strength Criteria in Semi-Analytical , Large Deflection Analysis of Stiffened Plates in Local and Global Bending

局部和整体弯曲下加劲板半解析大挠度分析中的强度标准

Limit Load Analysis for Local Wall-Thinning Pipeline under Bending

弯曲载荷作用下局部减薄管道的极限载荷分析