instron

Effects of TEOS content , silica sol content and the type and content of fumed silica on the shear strength of the adhesive and their strengthening mechanisms were investigated using a scanning electronic microscope and an electronic instron tester .

通过扫描电子显微镜和电子拉力机系统研究了二氧化硅含量以及种类对胶粘剂剪切强度的影响，并讨论了不同二氧化硅源对胶粘剂的增强机理。

Development of high rate loading test control software for Instron machine

INSTRON试验机高速加载试验控制软件开发

Development and application of CAT system for Instron material testing machine

材料试验机计算机辅助测试系统开发及应用

Research on dynamic tension test on Instron 1251 test machine

Instron1251材料试验机的动态拉伸试验

The Analysis of Instron 2165 Electro Hydraulic Fatigue test system

随机疲劳试验前Instron2165电液疲劳试验系统的分析

All specimens were tested with an Instron material testing machine .

所有测试均在Instron材料实验机上完成。

Abnormal running motor of static testing machine INSTRON 4507 is described in the paper .

文章介绍了INSTRON4507静态试验机出现电机转动异常情况，并分析其故障原因及制定相应的维修方案。

Reparation of Abnormal Running Motor for INSTRON 4507 Testing Machine

INSTRON4507试验机电机转动异常的维修

With Instron testing machine , destruction test on each model is performed to test fracture force values .

Instron万能材料测试机对试件进行破坏实验，测试折裂时的力值。

The tensile strength and 0.2 % yield strength were measured on Instron universal testing machine .

利用Instron万能拉伸试验机测试所得试件的拉伸负荷、0.2%屈服负荷，用扫描电镜分析断裂口性状。

The mechanical properties of the fiber were measured with an Instron 1122 universal material tester .

用INSTRON1122型万能材料试验机测定纤维的力学性能。

The measuring method of the microyield strength has studied with the INSTRON testing equipment .

利用INSTRON试验机研究了微屈服强度的测试方法。

The old measuring system of the Instron 6027 materials testing machine was replaced using JBK measuring system .

应用JBK测试系统替代Instron6027材料试验机的测试系统，使试验机恢复正常。

Conditioning performance was measured by the Instron wet combing method and sensory evaluations .

我们用英斯特朗（Instron）湿梳理性和洗发后感觉来评估它们的调理性。

Finally , tension , torsion , and bending tests are performed with INSTRON .

在INSTRON材料试验机分别做张力、扭力及弯曲负荷测试。

Both original transducers of INSTRON control console and various external transducers can be used for the system .

该系统除可使用INSTRON控制柜原有的传感器外，还可使用各种外接传感器。

Cylinder structure of carbon fiber reinforced epoxy resin matrix composite material is compressed by INSTRON and drop weight experimental equipment .

利用INSTRON实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了静、动态压缩实验。

The mechanical property parameters of cold rolled steel sheet were tested by using INSTRON 5569 electronic tensile testing machine in different conditions .

应用INSTRON5569型电子拉力试验机，在不同测试条件下，对冷轧薄板力学性能进行了测试分析。

The tensile Properties of glass bead filled LDPE composites were studied by means of an INSTRON Materials Tester .

应用Instron材料试验机，考察了拉伸过程中玻璃微珠填充LDPE复合体系的力学性能。

With the mechanical parameters of yarns from INSTRON tensile test , the properties of fabrics are achieved by calculating the modeling .

利用拉伸实验获得纱线的力学性能参数，代入模型可获得该纤维织物的抗冲击性能，并通过真实的冲击实验，验证了模型的可靠性。

Static and dynamic mechanical performances were measured by Instron - 6022 tensile equipment and DMTA V dynamic thermoanalysis equipment .

利用静态拉伸实验和动态力学分析对样品的力学性能进行了测试。

The flexural strength and hardness of the specimens were tested with an instron testing machine and a microhardness tester .

分别以应力分析仪和显微硬度仪测试两组试件的挠曲强度和硬度值。

Subordinate bodies of Instron have benefited from the management tools practicing the quality and permanence of part materials and the level of products ' design .

美国Instron公司在管理工具上的专业化应用帮助其属下工厂对其产品设计体系和零件材料的质量和耐用性进行检测。

The measurement of stress-strain curves for the thin slice of shape memory alloy has been solved basically without the instron drawing-machine .

初步解决了在非instron电子拉伸机上测定薄板记忆合金的拉伸σ-ε曲线问题。

A series of splitting tensile tests were conducted by using an INSTRON testing system to investigate the effect of cement-tailings ratio on the properties of backfill .

应用INSTRON刚性伺服试验机对不同灰砂比的充填体进行了劈拉试验，测得荷载-位移和应力-应变全曲线。

The performance of Instron 2165 Electro hydraulic fatigue test system is analyzed before performing a random fatigue test with it . The method , process and result of the analysis are given .

本文介绍了随机疲劳试验之前我们对Instron计算机控制2165电液疲劳试验系统做的分析方法与过程。

We impose cyclic loads on the specimens by the Instron testing machine to test its fatigue life , and then find out the results matching Weibull probability distribution .

用Instron电液伺服式疲劳试验机对试件施加循环荷载测其疲劳寿命，分析知疲劳寿命满足威布尔概率分布。

The rheological behaviors of PA6 / clay nanocomposites by in situ polymerization and PA6 were studied with Instron 3211 capillary rheometer .

采用毛细管流变仪测定了原位聚合的PA6/粘土纳米复合材料及PA6的流变性能。

The flexural strength was measured on Instron Universal Testing machine at a crosshead speed of 0.5mm/min . Data were collected and analyzed by ANOVA .

试件在Instron万能材料测试机上测试其弯曲强度，跨距为（20.0±0.1）mm，加载速度为0.5mm/min，使用单因素方差分析对测量数据进行统计学检验。

Experimental methods of tensile-test for the wheat stem were investigated , and finally a feasible method was developed successfully . By this method experiments were performed using an Instron Testing Machine .

对茎秆的拉伸实验方法进行了探索，找到一种可行的茎秆拉伸实验方法，成功地在Instron材料实验机上对作物茎秆进行了拉伸实验。