eyepieces

美 [ˈaɪˌpisɪz]英 [ˈaɪpiːsɪz]
  • n.(望远镜或显微镜的)目镜
  • eyepiece的复数
eyepieceseyepieces

eyepieces

频次

  • 1
    N-COUNT (显微镜或望远镜的)目镜
    The eyepiece of a microscope or telescope is the piece of glass at one end, where you put your eye in order to look through the instrument.

  1. Design of Refractive-diffractive Eyepieces with 70 ° Wide-angle Field of View

    广角70°视场折/衍混杂目镜设计

  2. Eyepieces can be found with shorter eye reliefs than that , but they are not comfortable to use for long periods .

    目镜中有不少是小于8MM焦距的,但是长时间的观测会非常的不舒服。

  3. The supplementary accommodation out of eyepiece and its application in optical experiment

    镜外辅助调节法及其在光学实验中的应用

  4. Image is viewed through an eyepiece perpendicular to main axis .

    通过垂直于主轴的目镜观察物体。

  5. In the beginning , he would still peek through the eyepiece .

    开始的时候,他还透过目镜看看。

  6. Large convex lens produces image that is viewed through the eyepiece .

    通过目镜观察物体图像的大的凸透镜。

  7. The lens through which we view the image is called the eyepiece lens .

    我们用于观察象的透镜称为目镜。

  8. CCD camera instead of eyepiece can avoid the inconvenience of traditional visual observation .

    设计中用CCD摄像头代替目镜可以避免传统的肉眼观察的不便。

  9. Does this extend to the edge of our eyepiece or camera field of view ?

    会延伸到目镜的边缘或者是像机的视场内么?

  10. Large concave mirror produces image that is magnified by the eyepiece .

    由目镜产生放大图像的大的凹透镜。

  11. The right for the standard color , optical eyepiece with light regulation and focusing ability , easy to use .

    其右边的为标准色颜色,光学目镜具有光线调节和调焦能力,使用方便。

  12. This is the size of the field our eye sees when looking into the eyepiece .

    就是我们透过目镜可以看到的区域范围。

  13. The increased image scale allows for imaging without an intervening eyepiece & like in prime focus photography .

    增加的意象尺度允许成像没有介入目镜-像在首相焦点摄影。

  14. The star test is lightning-fast and requires only a good high-power eyepiece .

    光轴矫正是快速的并且要求需要高倍数的目镜。

  15. I say approximately because distortion at the edge of the field in an eyepiece changes this relationship somewhat .

    说近似,是因为边缘变形改变了这种线性关系。

  16. A person downloads software to a phone and es a plastic eyepiece over the screen .

    将软件下载到手机上,并在屏幕上连接一片塑料的目镜。

  17. A person downloads software to a phone and attaches a plastic eyepiece over the screen .

    将软件下载到手机上,并在屏幕上附加一个塑料目镜。

  18. The result is an exit pupil that stays where the eyepiece designer intended .

    其结果是出瞳说,停留的地方目镜设计者的原意。

  19. You should center this fully illuminated area in the eyepiece by positioning the secondary in the correct location .

    你应该调整副镜的位置,直到在目镜里看到的明亮的区域位于中央。

  20. The angular resolution of this eyepiece is 0.44 mrad and less than that of human eyes .

    角分辨率为0.44mrad,小于人眼的最小角分辨率。

  21. The optical performance of the hybrid eyepieces are studied and compared with the Kellner eyepiece .

    设计结果与传统凯涅尔目镜的光学性能进行了分析和比较。

  22. Optical design of telescope zoom eyepieces

    变倍目镜光学设计

  23. That star would have been very carefully centered on crosshair in the eyepiece .

    那颗星在准星目镜中会被非常小心地集中。

  24. I looked through the eyepiece eagerly , only to be disappointed .

    我急切地把眼睛对准了目镜,结果很失望。

  25. The viewfinder eyepiece has a built-in – 1 correction lens ( suitable for normal vision ) .

    取景器的目镜是一片-1的矫正镜片(适合大多数普通视力)。

  26. The user looks into the eyepiece and uses the buttons on the phone to move two lines until they appear as one .

    用户对着目镜,使用手机按钮移动两条线,直到它们变成一条。

  27. The simple negative element Barlow increases eyepiece eye-relief .

    简单的消极因素巴卢增加目镜眼救济。

  28. Part Four researches the administration of teachers ' human resources contents and measures , employing the administration theories of human resources and advanced eyepiece abroad .

    第四章运用人力资源管理理论,激励理论及借鉴的先进经验研究民办高等学校教师人力资源管理的内容和措施。

  29. Optical eyepiece , mounted , of any material ( excl. of non-optically worked glass )

    接目镜,光学的,安装好的,任何材料制的(不包括未经光学加工的玻璃)

  30. This paper lists the four methods of cam curve drawing , and completion of the zoom eyepiece drawing with the dynamic optical theory .

    最后,对变焦光学系统中凸轮曲线的绘制方法进行了研究和探讨,文中列出了四种绘制凸轮曲线的方法,并用动态光学理论完成了对变焦目镜凸轮加工曲线的绘制工作。