Interfacial film

  • 网络界面膜
Interfacial filmInterfacial film
  1. Thickness and structure of the interfacial film of emulsion

    乳状液界面膜厚度与结构

  2. The results show that three-dimensional structure exists in the emulsions and it is the third major factor dominating the emulsion stability besides the electrostatic repulsive force between droplets and the solid interfacial film .

    研究结果表明,除静电斥力效应和固体界面膜的稳定作用之外,O/W型界面乳化液中的三维结构障碍也是其主要的稳定因素。

  3. Interfacial film is a key factor witch affects emulsion stability .

    而油水界面膜是决定乳状液稳定性的关键因素,其性质是有待深入研究的一个课题。

  4. The higher of oil-water interfacial film intensity , the more stable the emulsion .

    油水界面膜强度越高,乳状液越稳定。

  5. Dilational properties of interfacial film in EOR by interfacial tension relaxation method

    界面张力弛豫方法研究复合驱油水界面膜的扩张性质

  6. The research of stability of emulsions and Interfacial film properties of asphaltenes and resins

    沥青质和胶质的乳状液稳定性及其界面膜性质研究

  7. Dilational Viscoelasticity of Interfacial Film Formed by Active Components of Crude Oil at Oil / Water Interface

    原油活性组分油水界面膜扩张粘弹性研究

  8. Changing the nature of interfacial film in emulsion , reducing interface tension and the life of liquid drop .

    对复配型破乳剂的作用机理分析,主要有两点:1、改变乳状液界面膜的性质,降低界面张力和液滴寿命;

  9. INVESTIGATION OF STABILITY OF WATER IN CRUDE OIL EMULSIONS ⅵ . Properties of Interfacial Film and Stability of Crude Oil Emulsions

    原油乳状液稳定性研究Ⅵ.界面膜特性与原油乳状液稳定性

  10. A STUDY ON STABILITY OF WATER IN CRUDE OIL EMULSIONS ⅶ . The Influence of Wax Particles on Properties of Interfacial Film between Oil and Water

    原油乳状液稳定性研究Ⅶ.蜡晶对油水界面膜性质的影响

  11. While the shear rate increased , the structure of the oil-water interfacial film destroyed , and the value of the interfacial viscosity decreased .

    随着剪切速率的增大,界面膜结构被破坏,油水界面粘度减小。

  12. The results indicated the strength of oil - water interfacial film would degrade when the molecule of demulsifiers substitutes those of natual emulsifier .

    研究表明:破乳剂分子顶替原油中天然乳化剂分子,使油水界面膜强度下降,容易破乳脱水。

  13. Polar organic interacted with water-soluble polymers and come into complex , so the interfacial film of ink and water was strengthened and the stability of emulsion ink was improved .

    极性有机物和水溶性高分子化合物与表面活性剂分子相互作用,形成复合物,增加了油水界面膜的强度,从而可以提高乳化油墨的稳定性。

  14. Interfacial film formed from oil-water interface . The yield value of interfacial film increase as the emulsifier content increase , and the yield value of motor model oil system is larger than diesel oil system .

    油水界面间形成界面膜的屈服值随着乳化剂的含量增加逐步增加,且机油体系比柴油体系的界面屈服值大。

  15. In addition , the adsorption of emulsifier on the hydrophobic part of the hydrocolloid could have formed a mixed interfacial film of gum and emulsifier that increased viscoelastic properties .

    另外,乳化剂在亲水胶体的疏水部分的吸附作用也可能导致了胶与乳化剂复合界面膜的形成从而使粘弹性质的增加。

  16. In the study of influence of added surfactants on the property of interfacial film , the surface pressure was measured . That reflects only the spreading behavior of air / water interface and is limited for corresponding to the stability of oil / water interfacial films .

    在考察外加表面活性剂对气液界面膜的铺展行为时,用表面压测量方法,反映的是气液界面的性质,用以描述油水界面膜稳定性有所欠缺。

  17. There is a strongly structured interfacial film between the water and oil phases . The interfacial pressure , interfacial viscosity and interfacial primary yield value of the film can be the parameters for evaluating the strength of the film and the stability of the emulsions .

    在油水界面,由原油界面活性组分形成的界面膜具有较强的结构,油水界面压、界面粘度、界面屈服值可作为衡量界面膜结构强度的参数;

  18. Gas-liquid interfacial resistance film is one of the important factors influencing the interphase mass transfer .

    气-液界面阻力膜是影响两相间传质速率的重要因素。

  19. The strength of the joints was improved because the interfacial sputtering film improved the wettability of AlN . Referring to the self-guard mechanism of G.

    由于射频溅射于射频溅射的Al、Ti薄膜改善了AlN陶瓷与金属的润湿性,所以AlN/金属的结合强度明显提高。

  20. XPS depth concentration profiles show a gauss curve for N distribution and N / B ratio increases with implantation voltage . High implantation voltage results in an interfacial mixing between film and substrate .

    氮在膜中呈类似高斯分布,随着注入电压增大,膜的N/B比增大且影响氮在膜中的分布,在较高的注入电压时,膜基间产生界面混合。

  21. Analysis of the interfacial shear stresses between film and half-space substrate

    薄膜&半无限大基体复合材料界面剪应力分析

  22. The Influence of Interfacial Shear on Laminar Film Condensation in a Vertical Tube

    竖直管内液膜层流时汽-液界面切应力对冷凝过程的影响

  23. Effects of chemical vapor deposition conditions on the interfacial layer of diamond film on molybdenum substrate

    CVD条件对金刚石薄膜/钼基体界面层的影响

  24. A critical value of oxygen ratio can be expected to influence the thickness of the interfacial layer between ZrO_2 film and Si substrate .

    氧分压对ZrO2薄膜与基体的界面厚度的影响存在一个临界值。

  25. The poor mechanical strength and interfacial adhesion of low-k film limit its application in modern ultra-large scaled integrated circuit ( ULSI ) fabrication .

    low-k薄膜较差的机械强度和界面粘附性限制了其在ULSI制造工艺过程中的应用。

  26. Various substrates induce different interfacial mismatch between the film and substrate , and result in the changes of lattice distortion degree , grain size and texture distribution .

    不同的基底与Fe薄膜的界面错配度不同,可改变薄膜晶体位向的分布,导致晶格畸变程度和晶粒尺寸的变化。

  27. Water / crude oil interfacial tension , interfacial film strength and percentage of removed water from crude oil emulsions in the presence of demulsifiers was measured .

    测定了在破乳剂作用下原油乳状液的油水界面张力、界面膜强度及破乳脱水率。

  28. Similar to other emulsions , the stabilization mechanisms of produced water are as follows : interfacial tension stability , interfacial film stability , and double-layer stability , space stability and solid particles stability .

    与其他的乳液类似,采出水的稳定机制如下:界面张力稳定,界面膜稳定,双电层稳定,空间稳定和固体颗粒稳定。

  29. Interfacial shear viscosity is one of the important parameters of the interfacial film between oil and water of emulsion , which reflects the strength of the film .

    界面剪切黏度是表征乳液油水界面膜性质的重要参数之一,界面剪切黏度反映了油/水界面膜的强度。

  30. With the developments of the theoretical model and the experimental technology , the research of the interfacial dilational rheology has become one of the research hotspots of the interfacial film properties in recent years .

    近年来,随着理论模型和实验技术的进展,界面扩张流变研究逐渐成为界面膜性质研究的一大热点。