Fusion welding

美 [ˈfjuːʒn ˈweldɪŋ]英 [ˈfjuːʒn ˈweldɪŋ]
  • 网络熔焊;熔化焊
Fusion weldingFusion welding
  1. A Synchronous Multi-information Acquisition and Analysis System for Fusion Welding Process

    熔焊过程多信息同步采集及分析系统

  2. Hardness was quiet different in different zone of fusion welding joint .

    熔焊接头硬度分布不均匀,热影响区是薄弱环节。

  3. Comparison of Two Fusion Welding Techniques for Valve Surface Sealing

    气门密封面两种熔焊工艺焊层的组织、性能比较

  4. Analysis for Temperature Field of Butt Fusion Welding of PE Pipes

    聚乙烯管道热熔对接焊温度场的分析

  5. Numerical Simulation of Fusion Welding Process in Dissimilar Steel

    异种钢熔焊过程的数值模拟

  6. Research in Ferritic Stainless Steel Grain Boundary Corrosion during Fusion Welding

    铁素体不锈钢熔化焊晶间腐蚀的探讨

  7. Energy for friction stir welding is lower than conventional fusion welding .

    焊接时能量消耗比传统焊接方法低。

  8. Analysis of the Characteristic Zones of Zinc-Based Alloy Fusion Welding Joint

    锌基合金熔化焊接头特征区域分析

  9. Research Progress in Fusion Welding Technology of Titanium Aluminide Based Intermetallic Compound

    钛铝基金属间化合物熔焊工艺性的研究进展

  10. Investigation of MEMS Vacuum Packaging Based on Fusion Welding

    基于熔焊的MEMS真空封装

  11. Fusion welding , solid state bonding and brazing are discussed in detail .

    固相连接和钎焊较适于铝基复合材料的焊接。

  12. Investigation of Microstructure and Stress Distribution of the Fe_3Al Joint Zone by Fusion Welding

    Fe3Al熔焊接头区组织结构及应力分布研究

  13. Weiding Technique for Optic Fibres Optical fiber fusion welding technology

    光纤熔接技术

  14. Effect of Butt Fusion Welding Beads on Tensile Properties of Polyethylene Pipes

    聚乙烯管道热熔接头卷边对拉伸性能的影响

  15. A control system of a butt fusion welding machine for PE pipe is introduced in this paper .

    介绍了一种聚乙烯管道热熔焊机控制系统。

  16. This paper focuses on the optical fiber fusion welding technology in the practice with author 's working experience .

    作者在文中集自己的经验和体会,并从工程实践出发,介绍了光纤熔接技术。

  17. Investigation of MEMS Vacuum Packaging Based on Fusion Welding Research on simulation systems of MIG welding

    基于熔焊的MEMS真空封装熔化极气体保护焊的仿真系统

  18. A Theoretical Study on Chopping Current and fusion Welding Resistance of Contact Materials for Vacuum Switches

    真空开关触头材料低截流、高抗焊的理论研究

  19. Numerical Simulation on Residual Stress Fields and Temperature Fields of Weld Joint in the Process of Fusion Welding

    熔化焊焊接接头的温度场和应力数值模拟剂油短时接触催化裂化工艺及催化剂

  20. Effect of Technological Parameters of Butt Fusion Welding on Welded Joint Performance of Polyethylene Pipes

    聚乙烯管道热熔对接焊工艺参数对焊接接头性能的影响

  21. Based on the vacuum fusion welding instrument , this thesis investigates the process of current metal packages .

    在自主研制的真空熔焊封装设备的基础上,本文首先对现有的金属封装壳体进行工艺研究。

  22. The fusion welding , arc erosion mechanics and corrosion mechanics of Ag-W contact are also discussed .

    对银钨触头的熔焊特性、电弧侵蚀机理以及腐蚀机理进行了探讨。

  23. Repair of Axle Head and Shaft Half-coupling for Centrifugal Type Compressor by Laser Fusion Welding Technique

    激光熔覆焊在离心式压缩机轴头及半联轴器中修复的应用

  24. Because of the high proportion of alloy elements , traditional fusion welding is no longer adequate for combining these components .

    由于基材的合金化程度高,传统熔焊已不适用于连接这些部件。

  25. A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints .

    是指一个区域客观存在的有利于本区域经济社会发展且与其他区域比较有绝对或相对优势的各种条件(因素)。

  26. MAG and MIG fusion welding process and resistance welding process are used to weld the oil tank of motorcycle .

    摩托车油箱焊接采用MAG、MIG熔化焊工艺和电阻焊工艺。

  27. The experiment shows that fusion welding reinforcement could proceed on the surface with crack of the die after crack arresting .

    脉冲放电止裂后,可对带有裂纹的表面进行强化处理。

  28. The research status of welding of magnesium alloys by fusion welding and solid-phase joining at home and abroad is summarized .

    综述了近年来国内外镁合金在熔焊连接和固相连接两方面的研究现状与进展。

  29. Eventually , the W C-Co cemented carbide has favorable fusion welding of arc welding on study condition .

    最终证明:在本研究条件下,WC&Co硬质合金有良好的电弧熔焊的焊接性。

  30. Crystallinity , hardness , tensile strength and impact toughness of fusion welding joint of polyethylene pipes are tested and analyzed .

    测试和分析了聚乙烯管道热熔对接焊接头的结晶度、硬度、拉伸性能和冲击性能,并与基材的性能进行了比较。