首页 / 词典 / good

FOUCS

  • 网络击两次的招式
FOUCSFOUCS
  1. With the appearance of machine translation system , people begin to foucs on language information processing .

    随着机器翻译系统的出现,人们开始关注语言信息处理。

  2. Now , researchers foucs on using tissue engineering method to build the vascular tissue engineering substitutes .

    利用组织工程方法构建良好血管代替物的血管组织工程已经成为了当前研究的热点。

  3. Internal peace , harmony and foucs .

    聚精会神,保持平静和安宁。

  4. It mainly foucs on how to reduce seek distance and disk access delay and improve throughput by disk array configuration .

    主要研究如何通过配置磁盘阵列来达到减少寻道距离、减少磁盘访问延迟、提高吞吐量的目的。

  5. Clustering Routing has better scalability and robustness , and is the foucs of research in routing protocols at present .

    分簇路由协议具有较好的扩展性和健壮性,是目前WSN路由协议研究的重点。

  6. April , Foucs on International Furniture Expo , Milano

    四月,聚焦米兰&意大利米兰国际家具展速递

  7. The existing models foucs on multi-failure are all non-symmetric , this will increase the complexity of the actual system design .

    现有的针对多节点同时修复的模型都是非对称的,这会增加实际系统设计的复杂度。

  8. New curriculum reform points that Chinese teaching should foucs on improve students ' Chinese qualities comprehensively and it should strengthen the foundation of excellent traditional Chinese culture .

    新一轮课程改革提出语文课程应致力于全面提高学生的语文素养,高中教学要增强中华民族优秀传统文化的底蕴。

  9. As the core of information security technology from morden cryptography , making of morden cryptography technology into the field of information science research foucs .

    由于信息安全技术的核心源于现代密码学,使得现代密码学成为信息科学技术领域的研究热点。

  10. This article analses the influence of distributed generator on distribution network , with the foucs placed on relay protection and reliability assessment .

    本文以继电保护和可靠性评估为重点,研究了分布式电源对配电网的影响。

  11. Using the modern methods of quantitative analysis and cointegration theoretical , Chapter 5 of this paper foucs on the relationship between urbanization and readjustment of the industrial structure .

    第二、城市化和产业结构之间的关系。第5章采用现代计量分析方法中的协整理论分析了我国城市化和产业结构之间的数量关系。

  12. Since the Magic Realism was introduced in China in 1979 , it became one of the foucs concerned by the Chinese literatis and critics .

    魔幻现实主义从1979年被介绍到中国来之后,它就一直成为了中国文学家和批评家关注的焦点之一。

  13. Foucs on the tache of vacuum sealing , we design a kind of automatic discharge device which based on robot technique to replace the operation of artificial .

    针对晶振生产中真空封焊上料这一环节,利用机器人技术,设计了一台自动上料装置,从而取代手工上料的操作。

  14. Some new ideas are submitted , which foucs on the key technology , such as general protocol analytical tools using XML , and message queue resolved by embedded database .

    本文的WES-MOM系统的关键技术研究有部分创新的思路,包括通用协议的XML解释器和消息队列的嵌入式数据库等。

  15. After that , the dissertation foucs on some critical topics such as timer management , implementation of cache and TLB , discussed and analysed them .

    在完成了对各部件工作原理解析后,论文对虚拟机实现过程中的相关问题作了深入探讨,如定时器问题、Cache和TLB的模拟等。

  16. As an important part of biological resource , the yield of crop straws is very huge , and how to transform and use them becoming to the foucs of the whole world .

    秸秆是重要的生物质资源,其产量大、分布广,如何有效的转化利用成为全世界研究的热点。

  17. We collect a great mumber of data of demand , price , competitors and cost about these segment market , foucs on target market , work out investment budget and make prediction of profit .

    通过实地收集的需求量、价格、竞争品、成本等数据,对目标市场进行了定位,作出了投资预算和盈利测算。

  18. As become a research focus for its less need of prior knowledge . Firstly , this paper foucs on several key technologies in comunication system . And then , system model of DS-CDMA and the basic principle of multiuser detection was introduced .

    盲多用户检测由于需要的先验知识非常的少,使其成为人们研究的热点。首先,重点分析了通信系统里的几个关键技术,然后给出了DS-CDMA信号模型。

  19. This paper is foucs on experimental tests of a new type BRB which are shown as following : ( 1 ) Six BRB specimens were tested with cyclic loading history including standard loading history and low-cycle fatigue loading history .

    文本针对一种新型屈曲约束支撑,进行了以下试验研究:(1)对这种新型屈曲约束支撑试件进行了包括标准加载和循环加载在内的静力往复试验。

  20. But existing machining simulation systems mainly foucs on geometrical simulation , which can not display the physical phenomenon during machining . Also some information after machining can not be sent back to improve the process , to make it faster from design to manufacture .

    然而现有的加工仿真系统都集中于几何仿真,不能反映加工过程中的物理现象,也不能反馈工件加工后的相关信息以改进工艺、加快从设计到制造的步伐。

  21. It is different from the existing tracker which tracks the sun by the coordinates of declination-hour angle or of altitude-azimuth . It has more advantages for use , such as , small turned space , simple construction , and fixed foucs .

    它与现有的按时角和赤纬或者高度和方位坐标跟踪太阳的系统不同,具有占用转动空间小、结构简单以及焦点固定等优点。