Austenite

Melting Residual Stress is the main factor Causing Stress erosion damage on Austenite Rustless Steel 's Structures .

焊接残余应力是奥氏体不锈钢发生应力腐蚀破坏的重要因素

Wear resistance mechanism and working environment of austenite manganese steel

高锰奥氏体钢抗磨损机理及应用环境

On Surface Chemical Analysis of Sintering Austenite Stainless Steel Powder

烧结奥氏体不锈钢粉末表面化学分析研究

Uneven Factor and Control of Austenite Grain Growth of Tool Steels

不均匀因子与工具钢奥氏体晶粒长大的控制

Study on the Plasma Arc Welding Technology of Austenite Stainless Steel Parts ;

研究了电场奥氏体化对低碳钢的淬火组织的影响。

Correlation and Control of Piston Pin Thermal Stability and Residual Austenite

活塞销热稳定性、表面残余奥氏体相互关系及控制方法

A special method on quantitative analysis of remnant austenite

残余奥氏体定量分析的特殊方法

Effect of Martensite on Stability of Passive Film of Austenite Stainless Steel

奥氏体不锈钢中马氏体含量对其钝化膜稳定性的影响

Discussion of the Judge Measurement for Austenite Stainless Steel Crystal Boundary Corrosion Testing

管线钢奥氏体晶界的浸蚀及测定关于奥氏体不锈钢晶间腐蚀评定方法

Selection of austenite stainless steel in engineering of petrochemical plants

石油化工装置设计中奥氏体不锈钢的选用

Simulation of dynamic sensitization process of austenite stainless steel

奥氏体不锈钢敏化动力学过程模拟

Experiment Study on the Cause of Crack Located in Austenite Zone in Implant Test

灰口铸铁插销试验奥氏体区断裂原因试验研究

Technology of removing deformation magnetic property of metastable austenite stainless steel wire

消除亚稳定奥氏体不锈钢丝形变磁性的技术克虏伯奥氏体不锈钢

Effect of re on intergranular corrosion resistance of austenite weld metal

稀土对奥氏体焊缝金属晶间腐蚀敏感性的影响

Relationship between Transformation of Retained Austenite and Dynamic Tensile Behavior of TRIP Steel

TRIP钢动态拉伸行为的残余奥氏体转变相关性研究

Controlling of Edge Quality of Austenite Hot - rolled Stainless Strips

奥氏体不锈带钢热轧边部质量的控制

A Study of Transformation of Retained Austenite under Cryogenic Conditions

在深冷条件下残余奥氏体转变的研究

Substitutional Austenite Stainless Steel Electrode with Low Carbon Steel Core

低碳钢芯奥氏体不锈钢代用焊条的研究

Dynamic recovery behaviors of low carbon Mn-B steel in medium temperature austenite region

低碳锰硼钢中温奥氏体区的动态回复行为

Effect of Retained Austenite on Performance of High-Vanadium High - Speed Steel

残余奥氏体量对高钒高速钢性能的影响

Liquid penetrant test for austenite weld joint and the reliable measures

奥氏体焊缝渗透探伤与可靠性措施

Optimum of Mould Taper Design for Slab Casting of Austenite Stainless Steel

奥氏体不锈钢板坯连铸结晶器锥度的优化

Development of austenite stainless steel pipe and alloy steel pipe for power station boiler in Japan

日本电站锅炉用奥氏体不锈钢管及合金管的发展

Research on Austenite Recrystallization Behaviors of 82B High Carbon Steel During Hot Deformation

82B高碳钢热变形奥氏体再结晶行为研究

Analysis of microscopic structure and scanning electron micrograph of austenite steel welded joint

奥氏体钢焊接区域的金相组织及扫描电镜分析

And proper content of retained austenite profits to improve the rolling wear properties .

研究结果揭示了适量的残余奥氏体有利于提高滚动磨损性能。

Results show that the case is mainly made up of compound layer and retained austenite layer .

结果表明，渗层主要由化合物层和残留奥氏体层组成；

Relationship between grain diameter of dynamic recrystallization and deformation parameters in hot deformed austenite

热变形奥氏体动态再结晶晶粒直径与形变参数间的关系

With the increasing of cumulative reduction , the austenite grain size decreases .

结果表明：随着累积变形量的增加，变形奥氏体晶粒尺寸逐渐减小，且当累积变形量增加到一定程度后，奥氏体晶粒尺寸趋于一个定值。

The critical friction power changes with the matrix structure and that with austenite is the highest .

该临界值的高低与基体组织有关，奥氏体基体时最高。