Abrasive materials

美 [əˈbreɪsɪv məˈtɪriəlz]英 [əˈbreɪsɪv məˈtɪərɪəlz]
  • 网络磨料;研磨材料
Abrasive materialsAbrasive materials
  1. Applications : Asphalt or concrete , abrasive materials .

    应用:沥青混凝土及其他研磨材料。

  2. Used to produce alumina cement , abrasive materials , ceramic industry , as well as a variety of aluminum compounds .

    制造矾土水泥,研磨材料,陶瓷工业以及可制铝的各种化合物。

  3. The study of chief mechanical properties of abrasive materials

    磨料主要机械性能的试验研究

  4. Survey and Application of After-treatment Technology of Conventional Abrasive Materials Abrasive Machining

    常规心电图机概述普通磨料深加工后处理技术的发展概况及应用领域拓展

  5. Effects of Sliding Velocity and Abrasive Materials on Wear Behaviour of UHMWPE and PTFE

    滑动速度和磨料对UHMWPE和PTFE磨损的影响

  6. The impurity of abrasive materials made in China and the analysis of contamination of silicon plate from lapping

    国产磨料的杂质及研磨对硅片的污染分析

  7. This paper expatiates on the definition , types , and actual results of after-treatment of conventional abrasive materials .

    本文阐述了普通磨料后处理技术的定义、类型及实际应用效果。

  8. The new-type of ultrafine corundum abrasive materials , prepared by sol-gel technique , have excellent grinding performance .

    文章系统分析了这种新型磨料的性能特点、制造工艺、技术关键及其在生产中的应用。

  9. The after-treatment of abrasive materials during their granulating period can significantly improves the performances of abrasive grains .

    而在磨料加工制粒阶段采用一定的方法技术对磨料进行深加工改性处理,可以大幅提高其使用性能。

  10. The appropriate work condition of explosion hardening hadified steel is soft abrasive materials with high impact energy and high hardness abrasive materials with low impact energy .

    爆炸硬化高锰钢适用于低硬度磨料的冲击磨损及高硬度磨料的低冲击功冲击磨损的工况条件。

  11. In this paper , tne results and test for the influence of abrasive materials selecting , wheel life determing and process parameters controlling on the depth of the softened zone are introduced .

    本文研究了砂轮磨料选用,砂轮耐用度确定和工艺参量控制对软化层深度的影响。

  12. Compared with conventional engine lubricants , the major characteristics of low heat rejection engine lubricants ( LHREL ) are adaptable to high temperature lubrication and various new kinds of abrasive materials of engine .

    低散热发动机润滑剂与常规发动机润滑剂相比有两个主要特点,一是适应高温润滑,二是适应各种新型摩擦副材质。

  13. With high hardness abrasive materials of cobble , the impact wear-resistant of hadifield steel with explosion hardening increases 30 % ~ 50 % when impact energy was less than 1.7 J.

    在高硬度磨料(鹅卵石)冲击磨损时,在冲击功小于1.7J的条件下,爆炸硬化使高锰钢的冲击耐磨性提高30~50%。

  14. Ceramic industry : abrasive materials , alumina , porcelain clay mud , mud and superfine glass powder , refractory material , quartz sand , PVC powder grain tree , citric acid , PE powder , washing powder , etc.

    陶瓷行业:研磨料、氧化铝、瓷泥浆、粘土泥浆、玻璃粉、耐火材料、石英砂、PVC树脂粉粒、柠檬酸、聚乙烯粉、洗衣粉等。

  15. The content ( by vo lume ) of the former should be ≤ 0.88 % for ≤ 16 % cobalt alloy . Those over 0.88 % in the standard photograph are pseudoimages resulting from too large particle slie of abrasive materials during polishing .

    含钴量≤16%的合金中,共晶石墨的体积含量应≤c.88%,标准照片中>0.88%的照片,是抛光时研磨料粒子太粗造成的假象;

  16. Theoretic Study of Model Based on Ultrasonic Abrasive Hardness-brittle Materials

    超声振动研磨加工模型理论研究

  17. Hammer break Hammer Crusher for crushing all kinds of hard and abrasive weak materials .

    锤破锤式破碎机用于破碎各种中硬且磨蚀性弱的物料。

  18. Construction and implementation of database system of abrasive wear resistance materials

    耐磨料磨损材料数据库系统构成及实现

  19. Superhard materials as abrasive and tool materials developed quickly .

    超硬材料作为磨料和刀具材料发展得很快。

  20. The system can also aid the user to manage and select abrasive wear resistance materials effectively .

    该系统可以辅助用户有效地管理和选择耐磨料磨损材料。

  21. Research on superhard abrasive and functional materials B-C-N

    亚稳超硬功能材料B-C-N的研究

  22. Binder is to form a loose abrasive grinding solid materials , there are two types of inorganic and organic .

    结合剂是把松散的磨料固结成磨具的材料,有无机的和有机的两类。

  23. Our company was founded in1999 ; professionally manufacture kinds of nylon abrasive and polishing materials .

    公司创建于1999年,是一家专业生产各种尼龙抛光研磨材料的企业。

  24. The processing technologies , testing method , abrasive and accessory materials used in processing procedure of reticle are introduced in the paper .

    本文主要介绍调制盘的加工工艺与测试方法以及加工过程中所用的磨料与辅料。

  25. The user can input , store , inquire and print the data of abrasive wear resistance materials by AWRMDS .

    通过AWRMDS,用户可以输入、存储、查询和打印耐磨料磨损材料数据。

  26. Abrasive wear data of materials and material selecting for wearing parts

    钢铁的磨损数据及易磨损零件的选材

  27. The Impact Abrasive Wear Resistance of Materials and its Fatigue Wear Mechanism

    材料的冲击磨料磨损耐磨性及其疲劳磨损机制

  28. QUICK WEAR ABRASION SPARE PARTS AND MATERIALS Abrasive wear data of materials and material selecting for wearing parts

    矿用易磨损备件材料的研究钢铁的磨损数据及易磨损零件的选材

  29. The impact abrasive wear resistance of materials and its fatigue wear mechanism under the conditions of quartz and coal as abrasive had been investigated .

    研究了石英和煤两种磨料条件下材料的冲击磨料磨损耐磨性及其疲劳磨损机制。

  30. Recently years , the demands of cylinder diesel engine with high enhancement factor increased due to the speed and detonation pressure raised , and the abrasive resistance of cylinder materials under high temperature and pressure need to be improved .

    近年来,由于内燃机向高速和爆压方向发展,对高强化系数柴油机缸套要求越来越苛刻,对其缸套材料在高温、高压下的耐磨性也提出了更高的标准。