AISI
- 网络美国钢铁协会;钢号;美国钢铁学会标准;钢铁协会;美国钢铁协会标准
![AISI](../cache/880048.jpg)
-
High Temperature Shape Change Heat Treatment of AISI 422 Steel Blades
AISI422钢叶片高温形变热处理
-
Hydrogen enhanced crack growth and rate controlling processes in AISI 4340 steel
AISI4340钢的氢致裂纹扩展和扩展率的控制步骤
-
Study on Design Fatigue Curve for In-service AISI 4340 Steel
在役AISI4340钢设计疲劳曲线试验研究
-
The Manufacturing Technology of AISI 422 Steel Sector Plate
AISI422钢扇形板的制造工艺
-
The Effect of Consolidation Condition on the Structure and Mechanical Properties of AISI 304 Powder Material
固化条件对AISI304不锈钢粉末固化材的显微组织和力学性能的影响
-
Wear Mechanisms of AISI 1020 Steel against Natural Rubber under Dry Sliding
干摩擦条件下天然橡胶/钢的磨损机理研究
-
The manufacturing technological process of AISI 422 steel sector plate blank has been described .
介绍了AISI422钢扇型板毛坯的制造工艺流程。
-
A substitute for AISI 410 steel & its toughness control
AISI410钢的代用品及其强韧性控制
-
Microstructures of the AISI 316 Steel Annealed Under Different Conditions
AISI316钢在不同退火条件下的微观组织结构
-
The Properties and Applications of Chinese-Made AISI 403 Blade Steel
国产AISI403叶片钢的性能与应用
-
Study on Mechanisms of Wear of AISI - 1020 Steel by Natural Rubber under Boundary Lubrication Condition
边界润滑条件下天然橡胶-钢磨损机理的研究
-
Effects of environment on the overload behavior of fatigue crack propagation for AISI 321 stainless steel
环境对AISI321不锈钢疲劳裂纹扩展过载效应的影响
-
The AISI is not only focused on China .
美国钢铁协会关注的焦点不只是中国。
-
Nano-structured Films Formed on AISI 329 Stainless Steel Using Nd-YAG Pulsed Laser
应用Nd-YAG脉冲激光AISI329不锈钢表面制备纳米薄膜
-
Microstructure and Antibacterial Property of AISI 304 Stainless Steel After Chemical Copperizing Treatment
AISI304不锈钢渗铜后的微观组织及抗菌性能
-
Study on Submerged Arc Welding of AISI 304
AISI304钢埋弧焊工艺的研究
-
The mutual influence between deformation and anodic dissolution of AISI 321 austenitic stainless steel
奥氏体不锈钢的形变与阳极溶解的相互作用
-
SCC mechanism of AISI 321 in acidic chloride solution
321不锈钢在酸性氯离子溶液中的应力腐蚀开裂机理
-
Process Practice of Converter-continuous Casting Produce AISI 4145H Steel for Petroleum Drill
转炉连铸生产石油钻艇用AISI4145H钢工艺实践
-
Aisi direct steelmaking project and its progress
美国钢铁协会直接炼钢课题及进展情况
-
Experimental studies of grind-hardening for AISI 1045 steel
45钢磨削硬化的试验研究
-
Study on the Surface Oxidation Phenomenon of the AISI 304 Stainless Steel by Nd : YAG Pulsed Laser Melting
Nd:YAG脉冲激光熔凝AISI304不锈钢表面氧化现象的研究
-
Influence of plasma carburizing temperature on microstructure and properties of carburized layer for AISI 316L stainless steel
离子渗碳温度对316L不锈钢渗层组织和性能的影响
-
All other metal seal components of both inner and outer seals shall be aISI 316 stainless steel .
所有内置和外置密封的金属部件都应该是符合美国钢铁协会的316不锈钢。
-
In situ observation of nucleation and growth of high-temperature δ phase in stainless steel AISI 304 during heating
AISI304不锈钢加热过程中高温δ相形核与生长的原位观察
-
Investigation on SCC and SCC inhibition of AISI 316L stainless steel in acidic chloride solution
缓蚀剂对316L不锈钢在酸性氯离子溶液中应力腐蚀开裂的作用
-
Development of Steel for Drill Collar AISI 4145H
AISI4145H钻铤用钢的研制
-
Laser nitriding of AISI 4340 steel
AISI4340钢的激光氮化
-
Experimental research on behavior of decarburization for the flat die steels AISI d2 , m2 and S5
D2、M2、S5模具扁钢脱碳特性实验研究
-
The mutual influence between deformation and anodic dissolution of AISI 321 austenitic stainless steel in an acidic chloride solution was studied .
研究了形变对奥氏体不锈钢在酸性氯离子溶液中阳极溶解的加速作用以及阳极溶解对力学行为的影响。