糠醇

糠醇树脂炭化产物作为锂离子电池炭电极材料的研究（II）&炭化产物制备的电极材料组装的锂离子电池电化学性能测试

Study of the carbonized product of furfuralcohol resin as the electrode materials of lithium ion batteries ( ii ) & the testing of the electrochemical performance of the lithium ion cells assembled with the resin carbon materials

糠醇树脂的生产和发展

Production and Development of Furfuralcohol Resin

V2O5／γ-Al2O3催化四氢糠醇合成吡啶

Preparation of Pyridine from Tetrahydrofurfuryl Alcohol with V_2O_5 / γ - A1_2O_3 as Catalyst

用糠醇改性聚胺-酰亚胺制备H级层压板的性能

Preparation and Properties of Poly ( amine imide ) Modified ) by Furfuryl Alcohol Laminates for H grade Electrical Insulating Materials

糠醇改性聚胺-酰亚胺H级电绝缘层压板的形态结构与耐腐蚀性能

The Morphological Structure and Corrosion Resistance of Poly ( Amine-Imide ) Modified by Furfuryl Alcohol Laminates for H-Grade Electrical Insulating Materials

CuCr/γ-Al2O3催化剂结构及其对糠醛加氢制糠醇的影响

Influence of the structure of cucr / γ - al_2o_3 on the gaseous catalytic hydrogenation of furfural to furfuryl alcohol

当Mo含量为1.25%时，糠醛转化率、糠醇选择性都达到了100%。

When Mo Content was 1.25 % , both of the activity and selectivity of the catalysts reached to 100 % .

目前，糠醛加氢制糠醇生产中常用的催化剂含有对人体有害的物质Cr，并能造成环境污染。

Present traditional catalyst for furfural hydrogenation to furfuryl alcohol contains Cr is harmful to people ′ s health and causes severe environmental pollution .

糠醛常压气相加氢制糠醇催化剂CuCrK／γ－Al2O3

Cucrk / γ Al 2O 3 catalyst for furfural hydrogenation to furfuryl alcohol

通过对新旧催化剂的X射线荧光（XRF）、X射线衍射（XRD）及电子扫描显微镜（SEM）分析，探讨了糠醛液相加氢生产糠醇催化剂的失活原因。

The causes for deactivation of the catalysts for liquid-phase hydrogenation of furfural to furfurol were investigated by means of XRF , XRD and SEM .

超细Ni-B非晶态合金催化糠醛液相加氢制备糠醇

Preparation of Furfuryl Alcohol via Liquid Phase Furfural Hydrogenation over the Ultrafine Ni-B Amorphous Alloy

由丁酰氯和糠醇反应，以廉价的氧化钙和碳酸钠为复合束酸剂，合成了香料丁酸糠醇酯，并用IR、GC等进行了表征。

Using sodium carbonate and calcium oxide as cheap acid-capturer , perfume furfuryl butyrate was synthesized from furfuryl alcohol and butyryl chloride , and was characterized by GC and IR .

考察了四氢糠醇流量、反应温度，氢气、氨气流量，Pd负载量对反应的影响。

The effects of reaction conditions , such as the flow-rate of THFA , reaction temperature , hydrogen introduction , ammonia flow rate and palladium loading on catalyst were studied .

以CuOCaO/SiO2为催化剂，在固定床积分反应器中对糠醛气相加氢制糠醇反应本征动力学及宏观动力学进行了研究。

With CuO-CaO / SiO_2 friendly environment catalysts , the intrinsic and macroscopic kinetics of hydrogenation of furfural to furfuryl alcohol were studied in integral fixed-bed reactor .

Pd-Cu合金复合膜研制及膜反应器糠醛加氢合成糠醇研究

Preparation of Pd-Cu Alloy Composite Membranes and Study on Membrane Reactor for Hydrogenation of Furfural to Furfuryl Alcohol

本文研究了在CuCr/γ-Al2O3催化剂中Cu，Cr含量的变化，反应温度及活性组分浸渍液pH值对糠醛气相加氢制糠醇活性的影响。

The influences of contents of Cu , Cr in Cu Cr / γ - A1_2O_3Catalyst , pH of solution im - pregnated with active component , and reaction temperature on gas phase hydrogenation of furfural for making furfuryl alcohol were studied .

本文研究了常压下糠醛在催化剂（Cu-Si）存在下转化为糠醇的催化加氢作用，确定了催化剂适宜配料比和高活性催化剂的制备方法。

In this paper the hydrogenation of furfural is studied with the existence of Cu-Si catalysts under normal pressure .

以纯硅MCM-48为模板、对甲苯磺酸为催化剂、糠醇为碳源成功制备了高度有序的中孔炭分子筛。

Ordered mesoporous carbon was successfully prepared using siliceous MCM-48 as template , p-toluenesulfonic acid ( PTSA ) as catalyst , and furfuryl alcohol as carbon source .

负载型非晶态Ni-B及Ni-B-Mo合金催化剂催化糠醛液相加氢制糠醇的研究

Study on the Catalytic Properties of Supported Amorphous Ni-B and Ni-B-Mo Alloy Catalysts for the Liquid Phase Hydrogenation of Furfural to Furfural Alcohol

本文以糠醛液相加氢制糠醇为探针反应考察了不同载体和Mo对非晶态Ni-B合金催化性能的影响。

In this paper , the effects of different supports and Mo on the catalytic properties of the amorphous Ni-B alloy are studied , and the liquid phase hydrogenation of furfural to furfural alcohol is selected as probe reaction .

研究了以四氢糠醇（THFA）为原料，MoO3-Ce2O3-MgO/γ-Al2O3为催化剂，经气固相接触催化合成吡啶的反应。

Pyridine was prepared from tetrahydrofurfuryl alcohol ( THFA ) and ammonia by gas phase reaction over the catalyst MoO_3-Ce_2O_3-MgO supported on alumina .

以糠醛催化加氢合成糠醇作为模型反应，采用共沉淀法制备的Cu/MgO-K2O作为催化剂，考察了Pd-Cu膜反应器的加氢性能。

The performance of the membrane reactor ( MR ) for the hydrogenation of furfural to furfuryl alcohol over a Cu / MgO-K_2O catalyst prepared by the coprecipitation method as a model reaction was studied .

用溶胶凝胶法制得糠醛加氢制糠醇的Cu-Zn-Al-A催化剂，研究了制备条件对催化剂性能的影响，并对催化剂进行了TPR、BET、XRD等表征。

A new type of Cu-Zn-Al-A catalyst for gas phase hydrogenation of furfural to furfural alcohol was developed by sol-gel techinque . Influence of preparation condition on performance of the catalyst was investigated and the catalyst was characterized by TPR , BET and XRD .

在393～413K、0.25～0.4h-1、2.0～4.0MPa条件下，用上述催化剂加氢还原糠醇制备四氢糠醇。

Tetrahydrofurfuryl alcohol ( THFA ) was prepared from furfuryl alcohol with hydrogenation reduction by using the catalyst at 393-413 K , 0 25-0 4 h - 1 and 2 0-4 0 MPa .

糠醇糠醛型呋喃树脂的合成与胶泥的应用

Synthesis of Furfuryl-Alcohol and Furfurol Furan Resins and Use of Furan-Mastic

糠酸和糠醇酯类香料的研究

Study on the ester flavorings of furoic acid and furfuryl alcohol

铸造用糠醇改性脲醛树脂中游离甲醛的研究

Research of Free Formaldehyde in Furfural Alcohol Modified UF Resins for Foundry

脉冲-应答技术测定糠醇加氢反应的模型参数

Measurement of Model Parameters for Furfuryl Alcohol Hydrogenation Reaction with Impulse-response Technique

糠醇树脂碳化过程的核磁共振研究

NMR study of the carbonization proeess of furfuryl alcohol resin

糠醛气相加氢制糠醇动力学研究

Study on kinetics of gas phase hydrogenation of furfural for furfural alcohol